SecurView DVRSVIEWxV4 Manual de usuario descargar pdf (Pagina 19)

Troubleshooting

Please refer to the FAQ table below for easy troubleshooting. The table below describes some

typical problems and their solutions. Please consult these guides before contacting your DVR

dealer.

PROBLEM

SOLUTION

No power

- Check power cord connection.

- Confirm that there is power from the outlet.

- Ensure that the power is connected to the DVR

Motion Detection not working

- Ensure that motion detection is enabled for that

channel in the “DETECT” menu.

No live video

- Check the cameras cable and connections.

- Check the monitors cable and connections.

- Ensure you are not in playback mode.

Turn the DVR off and power on while holding the

SHIFT button.

No video over the network with web

browser or mobile

- Make sure that Extra Stream is enabled for each

camera on the DVR.

No recorded video - Check if the HDD is installed and connected properly.

Can’t detect your USB flash drive

- Use another USB flash drive to test.

- Ensure it is formatted to FAT32.

- Check Appendix B of User manual (on CD).

Can’t view the DVR images over the

network with web browser

- Ensure you have installed the ActiveX

- Check Section 8 of User manual (on CD).

This guide is intended as a Quick Set Up and Basic use manual only, please refer to the

user manual on the included CD for all other details.

1 2 ... 14 15 16 17 18 19 20 21

Sin comentarios

SecurView DVRSVIEWxV4 Manual de usuario Pagina 19